Environmental Engineering

I’m trying to learn for my Environmental Engineering class and I’m stuck. Can you help?So it's basically a report about the CCS (Carbon Capture and Storage) project that is taking place in Algeria, in Salah, I'll be attaching an outline for the report, and it's expected to be a 7-10 pages report. Please include table of contents and table of figures if any were used, and also please make sure to cite everything and add a reference list in the…

I'm working on a environmental engineering project and need a sample draft to help me study.I have attached the prompt and all the necessary documents to help complete this assignment. It is a small part of a bigger project, so there have been previous parts that have already been done, but they dont relate to this part. If you need them you can contact me and i will provide them. If any questions or complications arise, please contact me. Requirements:…

I need an explanation for this Environmental Engineering question to help me study.Please revise the attached "research paper.docx" . Also attached is the sources that I picked for the topic: The Impact of Aerially Deposited Lead from Transportation.Please use the sources that I picked and maybe you can find more sources related to my topic. Thank you!Information Sources - Information is collected from library/internet sources and also from the local agencies (CALTRANS, SANDAG) and consulting firms. A number of journals…

I’m trying to learn for my Environmental Engineering class and I’m stuck. Can you help?Project Objective: Develop an exposure monitoring plan, for the scenario provided.Remember to consider all possible hazards by understanding the process. The monitoring plan itself addresses airborne, skin, and surface exposure. If other hazards are present, list but do not include them in the overall plan. A rubric is available for guidance as well as a template. You do not need to stick to the formate as…

I don’t know how to handle this Environmental Engineering question and need guidance.problem 1A can of a degrading chemical has spilled into a small pond. List the data you would need to gather to calculate the concentration of pollutant in the stream leaving the pond using the mass balance technique. Collecting data is expensive!undefinedProblem #2 undefinedWhat model would you use to estimate the concentration of a pollutant in a river? What assumptions are inherent in this model? List at least…

Ensuring that neighborhoods are affordable for diverse residents means offering a broad array of housing and rental choices, from single-family homes to condos to apartments. Residents also need transportation options that fit their circumstances—whether they primarily drive or get around without a car—to access jobs, healthy food, schools, and other destinations. Affordable neighborhoods should also offer a range of commercial services and businesses, including grocery stores, household needs, childcare services, entertainment, and healthcare. Transit and transportation options can help by…

The Washita watershed includes 3 sub-basins (Sub) each of which equipped with a rain gauge station. Given the information and data below, estimate the discharge at Junctions 1 and 2. Please write a report for this project that has title, author name, introduction, results and discussion, conclusions and if you used any references, a references section. Your report should describe what you have learned by doing this project. Just saying “I learned how to create a schematic or junction” is…

Environmental engineering lab Lab Report (UV-Vis Spectroscopy)Lab reports should be prepared using in the following general format:• Cover Page• Introduction• Results• Discussion• Summary• References• Appendix DATA ANALYSIS 1. Plot a calibration curve of Absorbance vs. Concentration (see manuals) from Table 5-1.2. Determine the concentrations of three unknown samples based on their absorbances on Table 5-2.